Please Note: This article is written for users of the following Microsoft Word versions: 2007, 2010, 2013, 2016, 2019, Word in Microsoft 365, and 2021. If you are using an earlier version (Word 2003 or earlier), this tip may not work for you. For a version of this tip written specifically for earlier versions of Word, click here: Storing AutoText Entries with a Document.

Storing Building Block Entries with a Document

Written by Allen Wyatt (last updated September 23, 2020)
This tip applies to Word 2007, 2010, 2013, 2016, 2019, Word in Microsoft 365, and 2021


3

Rob has developed a document that contains a Word table that is used as a form for managing a project. Two cells in the table contain drop-down lists of alternatives using a Building Block entry. On Rob's machine, the drop-down lists work perfectly. When he transfers the document to a network drive so it is accessible to others in his office, the drop-down lists are no longer available. Rob would like this to work on other machines and is wondering what the trick is.

The trick is to understand that Building Block entries are not stored in documents; they are stored in templates. The default template in which they are stored is Building Blocks.Dotx. Since this template is available only on your machine, the Building Block entries required for the form are available only on your machine and not on others.

The solution, then, is to create a new template that will be used in conjunction with your form document. Store this template on the network drive and make sure that the form document has this template attached. Then, save the Building Block entries necessary to the form in the special template. To save a Building Block in the special template, follow these steps:

  1. Press Alt+F3. Word displays the Create New Building Block dialog box. (See Figure 1.)
  2. Figure 1. The Create New Building Block dialog box.

  3. Fill in the various fields of the dialog box, as desired.
  4. Depending on which version of Word you're using, use the Store In or Save In drop-down list to indicate you want the Building Block stored in your special template.
  5. Click on OK to save the changes and exit the dialog box.

WordTips is your source for cost-effective Microsoft Word training. (Microsoft Word is the most popular word processing software in the world.) This tip (10340) applies to Microsoft Word 2007, 2010, 2013, 2016, 2019, Word in Microsoft 365, and 2021. You can find a version of this tip for the older menu interface of Word here: Storing AutoText Entries with a Document.

Author Bio

Allen Wyatt

With more than 50 non-fiction books and numerous magazine articles to his credit, Allen Wyatt is an internationally recognized author. He is president of Sharon Parq Associates, a computer and publishing services company. ...

MORE FROM ALLEN

Reordering Last Name and First Name

If you've got a list of names in a column, you may want to change the order of each name. For instance, the name have the ...

Discover More

Reformatting a Document with Messed-Up Styles

If there are lots of hands that touch a document, there are lots of ways those hands can mess up the document. You may be ...

Discover More

Keeping Centered Headers and Footers Centered

Headers and footers provide a nice final touch for your printed documents. If you want to expertly align text in those ...

Discover More

Learning Made Easy! Quickly teach yourself how to format, publish, and share your content using Word 2013. With Step by Step, you set the pace, building and practicing the skills you need, just when you need them! Check out Microsoft Word 2013 Step by Step today!

More WordTips (ribbon)

QuickWords in Word

WordPerfect users coming to Word may miss a feature called QuickWords. This tip examines some ways you can get around the ...

Discover More

Deleting an AutoText Building Block

At some point you may want to delete an AutoText entry you previously created. Here's the steps to follow.

Discover More

Moving Building Block Templates

Not all templates are created equal. Word uses two special templates for storing building blocks. If you want to move ...

Discover More
Subscribe

FREE SERVICE: Get tips like this every week in WordTips, a free productivity newsletter. Enter your address and click "Subscribe."

View most recent newsletter.

Comments

If you would like to add an image to your comment (not an avatar, but an image to help in making the point of your comment), include the characters [{fig}] (all 7 characters, in the sequence shown) in your comment text. You’ll be prompted to upload your image when you submit the comment. Maximum image size is 6Mpixels. Images larger than 600px wide or 1000px tall will be reduced. Up to three images may be included in a comment. All images are subject to review. Commenting privileges may be curtailed if inappropriate images are posted.

What is nine minus 1?

2022-05-19 10:30:30

David Boyd

I want to back up my Building Blocks.dotx file before uninstalling Office 2019 and installing Office 2021.
I know it is a Template.
Websites tell me it is stored in Templates, but it is unclear whether that is the directory that the file is stored in, or an explanation of the fact that Building blocks are stored in dotx files (templates).
Nobody (so far) mentions where the file "Building Blocks.dotx" is stored.
I have already backed up the directory Templates to a seperate location on my HD, but I can't be sure that includes Building Blocks.dotx.
I have searched Appdata and then expanded that to searching my C drive for Building*.dot* and neither yield a search result.
According to one site, Word comes with a Building Blocks.dotx with some standard Building Blocks in it. So where is it?

David


2017-02-27 06:51:01

Moray

Ivy, I was also mystified when that happened to me. It seems Word uses 'lazy loading' for building blocks - a template must have a building block in it, before Word will load it as a source for building blocks :)
The workaround is to open the template you want to use, create a building block in that template - it can be just a small throwaway thing - and save that.
Now if you put the template in your Word Start folder, so that Word loads it as a global add-in, that template should appear in the Save in dropdown.

To make this template available to your colleagues, put it on a shared drive, and ask them to copy it to their Word start folders.

Hope that helps.


2017-01-10 10:34:05

ivy tillman

I'm a little lost...

i created a template separate from my form called bb4ivy.dotx, saved in my custom templates folder. When i open the create new building block control, this template is not available in the Save in dropdown.

2nd, how do i attach the special template to the form: just put it in the same folder, i.e. make sure they are together?

Thank you.


This Site

Got a version of Word that uses the ribbon interface (Word 2007 or later)? This site is for you! If you use an earlier version of Word, visit our WordTips site focusing on the menu interface.

Videos
Subscribe

FREE SERVICE: Get tips like this every week in WordTips, a free productivity newsletter. Enter your address and click "Subscribe."

(Your e-mail address is not shared with anyone, ever.)

View the most recent newsletter.