Please Note: This article is written for users of the following Microsoft Word versions: 2007, 2010, 2013, 2016, 2019, and Word in Microsoft 365. If you are using an earlier version (Word 2003 or earlier), this tip may not work for you. For a version of this tip written specifically for earlier versions of Word, click here: Breaking Lines in E-mail.

Breaking Lines in E-mail

Written by Allen Wyatt (last updated February 2, 2022)
This tip applies to Word 2007, 2010, 2013, 2016, 2019, and Word in Microsoft 365


1

Most e-mail client programs—especially those that use plain text instead of HTML—automatically "break" each line of e-mail at 70 or 72 characters. Fortunately, they do not typically break a line in the middle of a word, but do so at the beginning of the word that reaches the 70- or 72-character mark.

Unfortunately, this can have some adverse effects on e-mail you compose in Word. Some of your lines, when viewed by your recipient, can look strange, breaking at less-than-optimal places and generally looking pretty funky. The solution, of course, is for you to break each line when the appropriate place on the line is reached. This way you can control, ahead of time, how your recipient sees your message.

You can do this manually, if desired, by setting your message margins such that there is only 7 or 7.2 inches of space horizontally. You would then use a 12-point monospace font, such as Courier, to type the message. When a word wraps to the next line, simply backspace to the beginning of the word and press the Enter key.

This could get VERY old VERY fast, even if you send only a moderate amount of e-mail. The better solution is to allow Word to do the breaks for you, yet there does not seem to be such a capability in Word. (You can set up your options in Outlook or Outlook Express to automatically break lines for you, but that doesn't give you as fine a control as doing it directly within Word.)

This brings us to macro territory. You can use the following macro to inspect the current document and automatically "chop up" each paragraph so that no line is over 70 characters in length.

Sub ChopItUp()
    Dim DocThis As Document, docThat As Document
    Dim sParRaw As String
    Dim iParCount As Integer, iParOut As Integer
    Dim J As Long, X As Integer
    Dim iLineWidth As Integer
    Dim sLeft As String, sRight As String
    Dim sTemp As String

    iLineWidth = 70

    Set DocThis = ActiveDocument
    Documents.Add
    Set docThat = ActiveDocument
    DocThis.Activate

    iParCount = DocThis.Paragraphs.Count
    iParOut = 0
    For J = 1 To iParCount
        sParRaw = DocThis.Paragraphs(J).Range.Text
        If Right(sParRaw, 1) = Chr(13) Then
            sParRaw = Left(sParRaw, Len(sParRaw) - 1)
        End If

        sRight = sParRaw
        If Len(sRight) > iLineWidth Then
            While Len(sRight) > iLineWidth
                sLeft = Left(sRight, iLineWidth)
                sRight = Mid(sRight, iLineWidth + 1)
                flgDoIt = True
                If Left(sRight, 1) = " " Then
                    sRight = Mid(sRight, 2)
                    flgDoIt = False
                End If
                If Right(sLeft, 1) = " " Then
                    sLeft = Left(sLeft, Len(sLeft) - 1)
                    flgDoIt = False
                End If

                If flgDoIt Then
                    X = InStr(LTrim(sLeft), " ")
                    If X > 0 Then
                        sTemp = ""
                        While Right(sLeft, 1) <> " "
                            sTemp = Right(sLeft, 1) & sTemp
                            sLeft = Left(sLeft, Len(sLeft) - 1)
                            If Len(sLeft) = 0 Then
                                sLeft = sTemp & " "
                                sTemp = ""
                            End If
                        Wend
                        sRight = sTemp & sRight
                    End If
                    sLeft = Trim(sLeft)
                End If

                docThat.Paragraphs.Add
                docThat.Paragraphs(docThat.Paragraphs.Count).Range = sLeft
                sLeft = ""
                sRight = Trim(sRight)
            Wend
        End If
        docThat.Paragraphs.Add
        docThat.Paragraphs(docThat.Paragraphs.Count).Range = sRight
    Next J
End Sub

When you run this macro, it opens a brand-new document and copies the information from the old document to it, making sure that each line is no longer than 70 characters. The new document will not contain any formatting. (Since you are putting together plain-text e-mail, this should not be a problem.) If you want a different line width, all you need to do is change the value assigned to iLineWidth in the macro.

Note:

If you would like to know how to use the macros described on this page (or on any other page on the WordTips sites), I've prepared a special page that includes helpful information. Click here to open that special page in a new browser tab.

WordTips is your source for cost-effective Microsoft Word training. (Microsoft Word is the most popular word processing software in the world.) This tip (11466) applies to Microsoft Word 2007, 2010, 2013, 2016, 2019, and Word in Microsoft 365. You can find a version of this tip for the older menu interface of Word here: Breaking Lines in E-mail.

Author Bio

Allen Wyatt

With more than 50 non-fiction books and numerous magazine articles to his credit, Allen Wyatt is an internationally recognized author. He is president of Sharon Parq Associates, a computer and publishing services company. ...

MORE FROM ALLEN

Searching for Adjectives and Adverbs

Searching for different types of words in your documents is a nice thing to contemplate, but it is much harder to do in ...

Discover More

Finding Cells that Use Conditional Formatting

Conditional Formatting is a great boon to effectively displaying the information in your worksheets. If you want to ...

Discover More

Changing the Format of Existing Dates

There are a myriad of ways in which a date can be formatted: day first, month first, number of digits in the year, etc. ...

Discover More

Create Custom Apps with VBA! Discover how to extend the capabilities of Office 2013 (Word, Excel, PowerPoint, Outlook, and Access) with VBA programming, using it for writing macros, automating Office applications, and creating custom applications. Check out Mastering VBA for Office 2013 today!

More WordTips (ribbon)

Working with E-mailed Documents

Ding! You've got mail. That mail has a Word document attached to it. Before you rush off and open that document, take a ...

Discover More

Getting Rid of 'Mail To:' in E-mail Links

If you convert e-mail addresses to hyperlinks, you could end up with some 'mailto:' verbiage at the beginning of the ...

Discover More

Stopping E-mail Addresses from Being Initial Capped

When you type an e-mail address into Word, you might be surprised (and frustrated) when the program capitalizes the first ...

Discover More
Subscribe

FREE SERVICE: Get tips like this every week in WordTips, a free productivity newsletter. Enter your address and click "Subscribe."

View most recent newsletter.

Comments

If you would like to add an image to your comment (not an avatar, but an image to help in making the point of your comment), include the characters [{fig}] (all 7 characters, in the sequence shown) in your comment text. You’ll be prompted to upload your image when you submit the comment. Maximum image size is 6Mpixels. Images larger than 600px wide or 1000px tall will be reduced. Up to three images may be included in a comment. All images are subject to review. Commenting privileges may be curtailed if inappropriate images are posted.

What is two more than 9?

2022-02-02 08:29:56

jamies

I frequently use line break rather than new paragraph to get the next phrase on a new line.
you can use paragraph formatting in word to indent to the required position,
or - as I frequently do have one or more spaces following the new line, and then any tabs for extra indentation. and copy that for pasting in wherever I want to have a phrase on a newline without the extra gap between lines that are associated with the end of paragraph marker .
having a space as the first character after the newline stops any auto-indent associated with a tab at the start of a line of text.

newline is ^l (lowercase L) on word find replace with keyboard entry being shift enter.


This Site

Got a version of Word that uses the ribbon interface (Word 2007 or later)? This site is for you! If you use an earlier version of Word, visit our WordTips site focusing on the menu interface.

Videos
Subscribe

FREE SERVICE: Get tips like this every week in WordTips, a free productivity newsletter. Enter your address and click "Subscribe."

(Your e-mail address is not shared with anyone, ever.)

View the most recent newsletter.