Please Note: This article is written for users of the following Microsoft Word versions: 2007, 2010, 2013, 2016, 2019, Word in Microsoft 365, and 2021. If you are using an earlier version (Word 2003 or earlier), this tip may not work for you. For a version of this tip written specifically for earlier versions of Word, click here: Margins for All Documents Changing.

Margins for All Documents Changing

Written by Allen Wyatt (last updated June 8, 2024)
This tip applies to Word 2007, 2010, 2013, 2016, 2019, Word in Microsoft 365, and 2021


Dick wondered why, when he changes the margins of one document in a series of many, does Word change the margins of every document. From all he's ever read about Word that is not supposed to happen.

Dick is right; this is not supposed to happen. Word documents are based on templates, and when you create a document the margins are set according to the setting in the template you use. (If you don't instruct Word to use a specific template, it still uses the Normal template to create the document and the document's margins are based on what is in the Normal template.) If you later change the margins in the template, Word doesn't change the margins in any existing documents based on that template. It does, however, affect any documents you create in the future that are based on that template. If you have a whole series of documents based on the same template and you change the margins in one of the documents then the margins in the other documents (and in the template on which they are based) remain unaffected.

So, if your document margins are changing in some way not described above, there could be a couple of things at play. First of all, it could be that what you are seeing is not based on margins but on some other formatting setting. For instance, let's say that your document has margins of 1 inch and that your paragraphs all use the Body Text style. By default, all your paragraphs start 1 inch from the left edge of the paper.

Let's say that you later change the indent on the paragraphs in the document. You select all the paragraphs and drag the indent marker on the Ruler to the right by half an inch. Now it appears that your margin is at 1.5 inches, but it isn't really. What is really going on is that your margin is still at 1 inch and your paragraph indent is at .5 inches.

This normally wouldn't cause a problem, and only the current document would be affected. However, if you have the "Automatically Update" checked for the Body Text style (on the Modify Style dialog box), then the change you just made to the Body Text style (the changed paragraph indent) is "written back" to the Normal template. This means that all future documents based on the Normal template will have their paragraphs indented by .5 inches—at least those that utilize the Body Text style. In addition, if your other documents have the "Automatically Update Document Styles" check box selected (in the Templates and Add-Ins dialog box that is used to link the template to the document), then all those existing documents will have any of their paragraphs that use the Body Text style updated to reflect the new paragraph indent.

That's a lot of "ifs," but it is not an unusual scenario. If this scenario reflects the reality of how your documents are set up, then the only way to fix it is to turn off the two mentioned check boxes and then make changes to the documents individually.

If the above scenario does not reflect what is happening in your situation, then there could be other things affecting your documents. For instance, there could be some macro running behind-the-scenes that checks to see when margins get changed. The macro could then update other documents or templates to reflect the changes. This situation should be easy to recognize; just check to see if there are any macros associated with your documents. If so, check them out and see what they are doing.

So far I've assumed that you really are working with separate documents. If your documents are being handled as a single unit in some way, then none of what I've described really applies. For instance, if you are using a master document and subdocuments, then the subdocuments will, by design, use the margin settings of the master document instead of whatever margins may be set in the subdocuments. Closely related is the scenario of opening a new document and using the Insert tab of the ribbon to add new documents into the current document. The original, individual documents (and their margins) remain unchanged, but when they are inserted in the current document they adopt the margins of that new document. You can try to get around either of these situations by judiciously using section breaks between the documents and independently setting margins within each of the sections.

WordTips is your source for cost-effective Microsoft Word training. (Microsoft Word is the most popular word processing software in the world.) This tip (8252) applies to Microsoft Word 2007, 2010, 2013, 2016, 2019, Word in Microsoft 365, and 2021. You can find a version of this tip for the older menu interface of Word here: Margins for All Documents Changing.

Author Bio

Allen Wyatt

With more than 50 non-fiction books and numerous magazine articles to his credit, Allen Wyatt is an internationally recognized author. He is president of Sharon Parq Associates, a computer and publishing services company. ...

MORE FROM ALLEN

Can't Sort Imported Data

Import information from an external database, and you'll no doubt want to use Excel's simple tools to manipulate that ...

Discover More

Unhiding Columns that are Persistently Hidden

If you were trying to format a worksheet and nothing you did could make the first two columns appear, would you be ...

Discover More

Ignore Setting on Misspelled Words not Persistent

When Word flags a word as misspelled, you have some options of how to handle it. This tip explains those options and ...

Discover More

The First and Last Word on Word! Bestselling For Dummies author Dan Gookin puts his usual fun and friendly candor back to work to show you how to navigate Word 2013. Spend more time working and less time trying to figure it all out! Check out Word 2013 For Dummies today!

More WordTips (ribbon)

Formatting Line Numbers

Legal documents often use automatic line numbering for their documents. If you want to format those line numbers, you can ...

Discover More

Formatting Fractions

Need to have a great looking fraction in a document? It's relatively easy to do if you apply the formatting techniques ...

Discover More

Changing the Default Highlighting Color

One of the tools that Word makes available on the Home tab of the ribbon is the Text Highlight tool. This functions ...

Discover More
Subscribe

FREE SERVICE: Get tips like this every week in WordTips, a free productivity newsletter. Enter your address and click "Subscribe."

View most recent newsletter.

Comments

If you would like to add an image to your comment (not an avatar, but an image to help in making the point of your comment), include the characters [{fig}] (all 7 characters, in the sequence shown) in your comment text. You’ll be prompted to upload your image when you submit the comment. Maximum image size is 6Mpixels. Images larger than 600px wide or 1000px tall will be reduced. Up to three images may be included in a comment. All images are subject to review. Commenting privileges may be curtailed if inappropriate images are posted.

What is 9 - 8?

There are currently no comments for this tip. (Be the first to leave your comment—just use the simple form above!)


This Site

Got a version of Word that uses the ribbon interface (Word 2007 or later)? This site is for you! If you use an earlier version of Word, visit our WordTips site focusing on the menu interface.

Videos
Subscribe

FREE SERVICE: Get tips like this every week in WordTips, a free productivity newsletter. Enter your address and click "Subscribe."

(Your e-mail address is not shared with anyone, ever.)

View the most recent newsletter.